Tuffies dog bed care guide

  • How to wash your Raised Tuffies Bed

    The Raised Tuffie bed is mainly designed to be used with the fitted liner from Tuffies.1) Un-do the clips under the bed at the front. Seen from the inside: Seen from the outside: 2) Lift the liner...
  • How to wash your Tuffies Mattress Bed.

    Use really hot tap water (or even boil the kettle) and put a drop of Techwash from Nikwax (or similar type of liquid soap) into a jug. Pour the hot water in to dilute. Then, with thick rubber gloves so...
  • How to fit Fabric in your Really Tough Tuffie

    Unscrew the outer nuts and bolts and lift the top section off the whole bed. You will see the 12 plastic nuts and bolts that hold the fabric in place. You undo all those with your fingers. You can now...
  • How to fit your Full Nest Cover

    Once your dog has used his nest with nest cover for a while it needs to be washed. When you lift up the cushion in the middle you will find a wonderful mixture of dog hair, dust and possibly a forgotten...
  • How to wash your Tuffies Nest Bed

    Use really hot tap water (or even boil the kettle) and put a drop of “Techwash” from Nikwax (or similar type of liquid soap) into a jug. Pour the hot water in to dilute well. Then, with thick...
  • How to fit the nest Cushion in to the Nest

    To get the perfect fit, you just line up the label of the nest-surround with the MIDDLE of the LONG side of the cushion and push it in.
  • How to wash your really Tough Tuffie

    To wash your chew-proof Really Tough Tuffie, you lean it against a wall and wash it down in hot, soapy water. As long as the bed is upright none of the water will run in under the fabric to the stuffing. After...
  • How to fit your Luxury Fleece on Matress bed

    Hold the bed between your knees and put the cover on one end. Pull the cover all the way over the bed. Shake the bed in and close the poppers. Done.
  • How to fit your Plastic Bed Liner

    Place the liner loosely inside the plastic bed with the lower side corresponding with the low entrance on the bed. Secure the sides all the way round to fit under the lip on the plastic bed. Turn the...